Advertisement
CPU Installation
CPU Installation Notes
Please visit ASRock website and refer to user manual pages
CPU Fan Connector
1. Please connect the CPU fan or radiator fan to the header "CPU_FAN1". This way,
the CPU temperature will be used as reference for the CPU fan.
(If for some reason you would like to use a different header for the CPU/radiator
fan, make sure to select "Monitor CPU" as "Temp Source" for that header.)
2. If an AIO water cooler is used, please connect the pump to CPU_FAN2/WP, as it is
set to W_PUMP mode and full speed by default.
The information contained herein is the exclusive property of ASRock and shall not be distributed, reproduced, or disclosed in whole or in part without
prior written permission of ASRock.
Technical Information
Page 2
January 31, 2024
14 to
19.
Advertisement
