Product Graphics - Cub Cadet 2166 Operator's Manual

PRODUCT GRAPHICS

Keep product safety graphics (decals) clean. Replace
any safety graphic that is damaged, destroyed, miss-
STARTING INSTRUCTIONS
1. BE FAMILIAR WITH CONTROLS BEFORE
STARTING ENGINE AND OPERATING.
2. SET CHOKE, MOVE THROTTLE TO MID
POSITION AND DEPRESS BRAKE PEDAL.
3. TURN KEY TO THE START POSITION.
4. AFTER ENGINE STARTS OPEN CHOKE.
STOPPING INSTRUCTIONS
DISENGAGE PTO AND SET PARKING BRAKE .
1.
MOVE THROTTLE CONTROL TO MID
2.
POSITION AND TURN KEY OFF.
! WARNING
• AVOID SERIOUS INJURY OR DEATH.
• READ OPERATORS MANUAL AND ALL
WARNING LABELS
MACHINE.
GO UP AND DOWN SLOPES, NOT ACROSS.
•
• AVOID SUDDEN TURNS.
DO NOT OPERATE UNIT WHERE IT COULD
•
SLIP OR TIP.
• IF MACHINE STOPS GOING UPHILL, STOP
PTO AND BACK DOWN HILL SLOWLY.
• DO NOT MOW WHEN CHILDREN OR
OTHERS ARE AROUND.
• NEVER CARRY CHILDREN.
LOOK DOWN AND BEHIND BEFORE AND
•
WHILE BACKING.
• KEEP SAFETY DEVICES [GUARDS, SHIELDS,
AND SWITCHES] IN PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE
THROWN BY THE BLADES.
• KNOW LOCATION AND FUNCTION OF ALL
CONTROLS.
• BE SURE THE BLADES AND THE ENGINE
ARE STOPPED BEFORE PLACING HANDS
OR FEET NEAR BLADES.
• BEFORE LEAVING
POSITION, DISENGAGE PTO, ENGAGE
BRAKE LOCK, SHUT OFF ENGINE AND
REMOVE KEY.
GENERAL SAFETY INSTRUCTIONS
WARNING – LOCATED ON RIGHT
SIDE OF RUNNING BOARD
HANDS AND FEET SAFETY GRAPHIC–
LOCATED ON DEFLECTOR CHUTE
BEFORE USING
OPERATOR'S
ing, painted over or can no longer be read. Replace-
ment safety graphics are available through your
dealer.
SAFETY GRAPHIC – LOCATED ON
LEFT SIDE OF MOWER DECK
DEFLECTOR and SAFETY GRAPHIC –
LOCATED ON RIGHT SIDE OF DECK
SAFETY GRAPHIC – LOCATED
ON LEFT SIDE OF DECK
7