Hitachi HK560 Instruction Manual page 21

Dolby Vision
Notification
PC Position
Autoposition
H Position
V Position
Dot Clock
Phase
Pixellence Demo
Reset
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.
Sound Menu Contents
Volume
Equalizer
Balance
Headphone
Sound Mode
Bluetooth
AVL (Automatic
Volume Limiting)
Headphone/Lineout
DTS TruSurround HD
Digital Out
Bass Gain
Sets the notification appearance preference for Dolby Vision contents. When set as On,
Dolby Vision logo will be displayed on the lower right side of the screen when Dolby
Vision content is detected.
Appears only when the input source is set to VGA/PC.
Automatically optimizes the display. Press OK to optimize.
This item shifts the image horizontally to the right hand side or left hand side of the screen.
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or noisy picture on
the screen. You can use phase to get a clearer picture by trial and error.
Pixellence function optimizes the TV's video settings and helps to acquire a better
image quality. Press OK to activate Pixellence demo mode to experience Pixellence
quality. Press OK button again to cancel. If the Mode option is set to Game this option
will not be available.
Resets the picture settings to factory default settings (except Game mode).
Adjusts the volume level.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Adjusts whether the sound comes from the left or right speaker.
Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
You can select a sound mode (If the viewed channel supports).
Press OK to open the Bluetooth menu screen. Using this screen you can discover and
connect the Bluetooth wireless technology enabled sound devices to your TV.
Sets the sound to obtain fixed output level between programmes.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
Enables or disables the DTS TruSurround HD.
Sets digital out audio type.
Controls the bass gain level. Use Left or Right button to set.
English - 20 -