Dell Thunderbolt UltraSharp 34 User Manual page 90

Table of Contents

The OSD functions only in the normal operation mode. If you press the joystick

during the Standby mode, the following message will appear depending on the

selected input:

Activate the computer and the monitor to gain access to the OSD.

NOTE: The message may be slightly different according to the

connected input signal.

If Thunderbolt, DisplayPort, or HDMI input is selected and the corresponding cable

is not connected, the following message will appear:

NOTE: The message may be slightly different according to the selected

input signal.

See

Troubleshooting

│

Operating the monitor

for more information.

Table of Contents

U3425we