Viewing Templates; Simulating Jobs With A Template - Xerox DocuColor 7000AP Release Notes

8

Viewing Templates

Simulating Jobs With a Template

Table 1: Saved imposition templates in Layout list according to imposition method
Method selected on
Imposition tab:
Step & Repeat
Step & Continue
Saddle Stitch
Perfect Bound
As you create or modify a template, you can see your template in the template
viewer. As you select parameters, the template viewer dynamically changes to
reflect your selections.
In the template viewer you can view the front or back pages of a template, or both
,
front and back pages simulataneously.
Notes:
•
When Simplex is selected, only the Front view is available
•
Sheet size is set on the Imposition tab. The sheet size that appears in the
template viewer is dynamic. It changes to accomodate the parameters that
you choose.
The template viewer also enables you to rotate one or more pages and change the
location of pages on the sheet.
You can simulate how jobs from the Storage window will look if you apply an
imposition template to them.
Xerox CX Print Server 1.0 Release Notes
Template layout type in the
layout list:
Step & Repeat, Cut & Stack
Step & Continue
Saddle Stitch, Perfect Bound
Saddle Stitch, Perfect Bound
.