Pyramid PL100 Installation Manual

Electronic digital door lock
Hide thumbs Also See for PL100:

Advertisement

Quick Links

PL100
Electronic Digital Door Lock
(Indoor Use Only)
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Pyramid PL100

  • Page 1 PL100 Electronic Digital Door Lock (Indoor Use Only) Installation Guide...
  • Page 2 The information contained herein is subject to change without notice. The only warranties for Pyramid are set forth in the express warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
  • Page 3: Table Of Contents

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 TABLE OF CONTENTS PRODUCT OVERVIEW FEATURES CONTENTS PRE-INSTALLATION LEVER DIRECTION LEVER ADJUSTMENT FRONT PANEL LEVER ADJUSTMENT BACK PANEL TEMPLATE SETUP LATCH INSTALLATION FRONT PANEL INSTALLATION BATTERY CHASSIS INSTALLATION BACK PANEL INSTALLATION INSTALLATION TEST...
  • Page 4: Product Overview

    Thank you for choosing a PL100 Electonic Digital Door Lock! The PL100 is a wireless electronic digital door lock that features digital code access, proximity card /fob access, and a manual key! Easy to install and instant security to any room with up to 200 users (Codes or/and proximity cars/fobs).
  • Page 5: Contents

    (Use B1 or B2 for mount depending on thickness) PL100 Electronic Digital Door Lock User Guide Rubber Pad Square Spindle Pl100 User Guide Hole Drilling Template Standoff Screw x1 (C) (front panel) (2X) WHAT YOU WILL NEED Pencil Phillips...
  • Page 6: Pre-Installation

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 Pre-Installation Steps Measure Door Thickness Standard Door Thickness is 35-45mm (1 3/8” to 1 3/4”) If the Door is More Than 45mm and up to 110mm (1 3/4”-4 3/8”) You’ll Need To Use Custom Accessories Included. See #5 on the Front Panel Installation steps sheet page 7.
  • Page 7: Lever Adjustment Front Panel

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 Lever Adjustment Front Panel Insert Cylinder Key Into Rotate Slot Front Handle To Horizontal Position Front Handle Locking Pins 90º Insert and turn key 90º in the front handle Insert the “pilot” of cylinder key into “slot” (horizontal position).
  • Page 8: Lever Adjustment Back Panel

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 Lever Adjustment Back Panel Loosen the screw Slowly rotate the handle to the other side If handle jams, loosen screw a bit more Adjust the handle direction as desired Re-tighten Screw Back Panel (Manufactured set “right”...
  • Page 9: Template Setup

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 Template Set-up Measure 1 meter (39.37”) from ground and draw a horizontal line on all three sides of door Align *door template with horizontal line centered in handle centerline and mark drill holes.
  • Page 10: Battery Chassis Installation

    ELECTRONIC DIGITAL DOOR LOCK INSTALLATION Model PL100 Rubber Pad Battery Holder Chassis Install Place rubber pad between chassis/door and pull wire through wire hole in chassis. Attach battery holder chassis with screws B1 or B2 (depends on door width) Connect wire harness to battery connector Screw B1(x2) or B2(x3) Back Panel &...
  • Page 11: Warranty

    Pyramid Time Systems will also assess a 15% fee if any item(s) are missing in an open box return. Shipping back to Pyramid Time Systems from a Pyramid Time Systems Partner is the responsibility of the Pyramid Time Systems Partner.

Table of Contents