Table of Contents
Advertisement
Chapter 6
6 2
Connect Wireless Devices to the Extender
Method 1: Connect to the extender manually
You can connect your wireless devices to the extender by using the extender's wireless
network names and passwords.
Method 2: Connect to the extender via WPS
Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection.
Wireless devices that support WPS, including Android phones, tablets and most USB
network cards, can be connected to your extender through this method (not supported
by iOS devices).
1. Visit http://www.tplinkrepeater.net, and log in with your TP-Link ID or the password
you set for the extender.
2. Go to
Settings
>
Wireless
3. Enable WPS.
4. Connect via WPS:
• AP's PIN: Enable
to get a new PIN or click
• Push Button (Recommended): Click
client device.
• PIN code: Enter the client's PIN, and click Connect.
> WPS.
AP's PIN
and enter the PIN on your device. You can click
Default
to restore the PIN to its factory one.
Use Your Extender as an Access Point
Connect
and push the WPS button on the
Generate
35
Advertisement
Table of Contents
