Xerox 4850 Installation Planning Manual page 115

Item
description Default
PROC None
AUTOSTOP NO
HASPFSSM HASPFSSM
CLASS None
COPYMARK DATASET
FORMS None
FSS None
XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
2. Enter the following required commands in the JES2 initialization
dataset to define the PSF functional subsystem (FSS):
•
One FSS statement for each PSF functional subsystem
•
One PRTnnnn statement for each functional subsystem
application (FSA) under control of the FSS. (This can also
be specified as PRINTnn or PRINTERn.)
The following table lists the JES2 FSS statement parameters to
be defined.
Table E-1.
Range of
acceptable
Source of value values
PSF Startup 1 to 8-character
procedure name/ alphanumeric
string
Installation YES or NO
preferences
JES2 Load module HASPFSSM
to be loaded into
FSS address space
Installation output List of
class standards alphanumeric
output classes
Installation DATASET or
preferences JOB or
CONSTANT
Forms that will be 1 to 8 form
printed on this names (each 1 to
printer 8 alphanumeric
characters in
length)
Name of FSS 1 to 8-character
alphanumeric
string
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
JES2 FSS statement parameters
Comments
Specifies name of
procedure for starting
this FSS. Different FSS
statements can refer to
the same startup
procedure
Specifies whether FSS
address space is
stopped automatically if
all FSAs under control of
the FSS are stopped.
Either omit parameter or
specify default value of
HASPFSSM.
Can also be specified as
QUEUE=
DATASET: IPS printer
will offset-stack or stitch
on a dataset boundary.
JOB: IPS printer will
offset-stack or stitch on
a job boundary.
CONSTANT:
Copymarks are
constant; no offset
stacking or stitching is
done.
If WS is F, only output
with these form names
will be selected for
printing on this printer.
Required
Your value
E-3