Table of Contents
Advertisement
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform
Module (TPM) system, which can securely store
keys, digital certificates, passwords and data. A
TPM system also helps enhance network security,
protects digital identities, and ensures platform
integrity.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
Correctly orient the ATX power supply plugs into these connectors and push
down firmly until the connectors completely fit.
M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
Intel
®
Install Intel
designed for 7th / 6th Generation Intel
processors.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
1-2
•
For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later
version) and provides a minimum power of 350 W.
•
If you are uncertain about the minimum power supply requirement
for your system, refer to the Recommended Power Supply Wattage
Calculator at http://support.asus.com/PowerSupplyCalculator/
PSCalculator.aspx?SLanguage=en-us for details.
This socket supports M Key and
2242/2260/2280 storage devices.
LGA1151 CPU socket
LGA1151 CPU into this surface mount LGA1151 socket, which is
®
For more details, refer to Central Processing Unit (CPU).
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN
connector supports a CPU fan of maximum 1A (12 W) fan power.
S_PCIRST#_TBD
C_PCICLK_TPM
Core™ i7 / i5 / i3, Pentium
®
Chapter 1: Product introduction
TPM
+3VSB
F_CLKRUN
F_SERIRQ
F_FRAME#
GND
F_LAD3
F_LAD2
F_LAD1
+3V
+3V
F_LAD0
PIN 1
M.2(SOCKET3)
, and Celeron
®
®
Advertisement
Table of Contents
