Table of Contents
Advertisement
Operating the oven
Operating the oven
Default Cavity
One cavity will be selected as a default in twin mode when oven turns on.
1.
Tap and hold
for 3 sec.
2.
Select Default Cavity using the dial knob.
Turn the dial knob to select Upper or Lower and push to save the changes.
3.
Welcome Lighting
When you wake up the oven (such as using the dial knob, using the touch pad,
open the door), the knob lights blink each to welcome you.
Set the Welcome Lighting mode to On/Off. The default is on.
1.
Tap and hold
for 3 sec.
Select Welcome Lighting using the dial knob.
2.
3.
Turn the dial knob to select On/Off and push to save the changes.
Virtual Flame
TM
You can enable or disable the Virtual Flame
1.
Tap and hold
for 3 sec.
2.
Select Virtual Flame
using the dial knob.
TM
Turn the dial knob to select On/Off and push to save the changes.
3.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1.
Tap and hold
for 3 sec.
2.
Select Demo mode using the dial knob.
Turn the dial knob to select On/Off and push to save the changes.
3.
Reset
You can reset your oven setting(More functions, System settings).
1.
Tap and hold
for 3 sec.
2.
Select Reset using the dial knob.
3.
Turn the dial knob to select Cancel/Reset.
CAUTION
Before reset the oven settings, turn off all oven and cooktop functions.
54 English
TM
.
Smart control
How to connect the oven
1.
Download and open the SmartThings app on your smart device.
2.
Follow the app's on-screen instructions to connect your range.
3.
Once the process is complete, the connected
displays and the app will confirm you are connected.
4.
If the connection icon does not turn on, follow the instruction on the app to
reconnect.
icon located on your range
1
Advertisement
Table of Contents
