Cateye CC-7000 Instruction Manual page 15

UL
Seduring the Wire
(Fig. 13)
(Fig. 14)
Clamp the wire with wire clips as shown in Fig. 11, 12. Loosen the wire in the area marked with the arrow (<>•) so that the wire does not
hinder handlebar operation. Fold the excess wire at the clip area as shown in Fig. 13. Pass the clip end through the clip hole as shown
in Fig. 14, and firmly pull the end with pliers or similar tool. Cut off the projecting part of the clip.
-
14
-