Table of Contents
Advertisement
Assembly Procedure
Start assemble each accessories with following steps.
l Step 1: Install Rope Riser
The star nut is inserted into the rope riser and then into hollow at
the end of the bed. You can adjust the rope at different height
through the ropeway.
Fig1
l Step 2: Install The Foot Pedal Placement
Please put the stainless steel face into the slot and then tighten
the nut. You can put in a hand step or a soft step depending on
the needs of the exercise.
Fig4
Fig2
Fig5
Fig3
Fig6
Advertisement
Table of Contents
