Table of Contents
Advertisement
a 1 vent collar
for exhaust duct 9 ³/₄" (250 mm).
The vent collar is not used for
recirculation mode.
b 1 mounting rail
for mounting the DAR 12xx-3 on a
wall
c 2 mounting brackets
for mounting the DAR 12xx-3 on a
wall
d 2 cover caps
3 screws, 5 x 60 mm and
3 plugs, 8 x 50 mm
for attaching to the wall (DAR 12xx-3
only). Plugs not for use in USA / CDN.
The screws and plugs are
designed for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 self-locking screws, M6 x 16 mm
for attaching the DAR 12xx-3 to the
mounting rail.
4 screws, M4 x 11 mm with base and
2 clamps
for securing the DRDC and DRUU duct
Covers (DAR 12xx-3 only).
10 screws, M4 x 8 mm
for fastening the cover caps and the
clamps (DAR 12xx-3 only).
4 screws, 5 x 35 mm
for securing the DAR 11xx Range
Hood.
Keep the following in a safe place:
Installation plan
Installation
27
Advertisement
Table of Contents
