Features And Controls - Lanzar OPTI 1200HC Owner's Manual

Features and Controls
1. Line Out RCA Jacks - The LINE OUT allows you to build multiple amplifier systems
with out having to use splitter cords to distribute the signal. Now it is simple a matter of
bringing one set of RCAs into the first amplifier, then using the line out RCA jacks as the
feed to the next amplifier.
2
. Input RCA Jacks
- These inputs are for signal cables from the source.
Always use high quality shielded RCA cables.
3.
Level Control-
Enables the matching of input levels to the output levels from
the head unit(or other signal source).
4
. Variable Bass Boost Control- Increases sound level in lower frequency by i8dB.
5
. Variable Low Pass Filter-
When Crossover Mode Selector is in Low Pass Mode, this control
limits the frequencies which will be distributed to the speakers to those below the value
to which this is set within the range50~i2oHz. (OPTI1200HC/2200HC :5oHz~i5oHz)
6
. Variable High Pass Filter-
When Crossover Mode Selector is in High Pass Mode, this control
limits the frequencies which will be distributed to the speakers to those below the value
to which this is set within the range50~75oHz.
7
. Crossover Mode Selector-
Determines the mode of built-in crosover
low pass(permits only low frequency signals to pass to speakers), high pass(permits onlt high
frequency signals to pass to speakers), or flat.
.anzar
OPTI OLURER S
mAHUAL - 8