Wireless A/V System - X10 MK10A Owner's Manual

S
ETTING
W A/V S
IRELESS YSTEM
Parts
• VT42A USB Video Sender
• Power-supply for Video Sender
• Power supply for Video Receiver
• RCA A/V cable
• Stereo jack splitter
• Stereo jack to RCA Audio cable
Home Theater System
To existing
PC speakers
VGA Out
Video Out
Sound Out
Audio
USB Port
Adapter
Home Theater Receiver (or back of TV)
To A/V jacks
on back
of Sender
100 ft.
VT42A
Video Sender
Note: Place the VT42A Video Sender as far away from your computer and
its monitor as its cord allows.
8
U
P
• VR38A Video Receiver
• Lola Remote Control
• S-Video cable
• S-Video to Video converter
• RCA video cable
Video In
Audio
Video
Audio In
Out Out
100 ft.
To A/V jacks
on back
of Receiver
VR38A
Video Receiver
UR89A
Lola
Remote
S
ETTING
W A/V S , .
IRELESS YSTEM CONT
Setup
Connect one end of the yellow video cable into the TV Out port on your
computer's video card. If your computer has an S-Video Out, connect the
S-Video cable to the video card, plug the other end into the S-Video to RCA
converter, and then plug the yellow RCA video cable into the converter.
Plug the other end of the video cable into the USB Video Sender.
Unplug your speakers from your computer's sound card. Plug the mini-
stereo jack splitter into the audio out (sometimes labeled "Line Out") jack
on the sound card that your speakers were plugged into. Plug the speakers
into one side of the splitter. Plug the mini-stereo to RCA cable into the other
side of the splitter. Plug the red and white ends of the cable into the USB
Video Sender 's "Audio In" jacks.
Plug the power supply into a power outlet and connect the other end to the
"DC 9V" plug on the Video Sender. Switch the Video Sender on and flip up
the antenna. Point the side of the antenna with four squares on it in the
direction where you'll set up the Video Receiver.
You should have already plugged the VT42A Video Sender's USB plug into
your computer's USB port when you installed the software (page 4).
VT42A
To USB port on To Video out on
your computer. your computer.
Go to page 13 to set up the Receiver.
9
U
P
DC 9V
To Audio out on To plug-in
your computer. power supply.