Controlling An Ir Mini Controller; Expanding Your System - X10 HK10A SUPERREMOTE Owner's Manual

4. Press the ENTER
button to confirm
the House Code.
The LED turns off.
Note: The House Code you choose must
match the House Code on the Trans-
ceiver and Modules you are using it
with.
C
ONTROLLING AN
IR M C
INI ONTROLLER
If you already own an IR Mini Controller,
you will need to change the X-10 Home
Automation code in the remote to use it.
The code for standard X-10 RF Home
Automation is 013. The code to control
the IR mini controller is 014. To change
the code:
1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2. Press and release
the X-10 button.
3. Enter 014 to
control an IR Mini
Controller, or 013
for standard X-10
control. The LED
turns off after the
last digit entered.
Note: In most cases, you will not need to
use the IR mini controller to receive
commands from the remote - the
Transceiver Module does this for you and
has the added advantage of working
through walls. You can't control the IR
mini controller and the Transceiver
Module at the same time.
(IR543)
28
E
XPANDING
YOUR
The modules illustrated below represent
just a few of the wide range of X-10
compatible modules you can choose from
to expand your Home Automation system.
They are available from electrical outlets,
department stores and mail order
catalogs.
X-10 Home Automation products also in-
tegrate with X-10 security systems, so you
can use the security remotes that come
with them to control macros and flash
lights when the security system is tripped.
Check out our Web Site at:
HTTP://WWW.X10.COM
for more information on these and many
other X-10 products.
The Dual Floodlight
Motion Detector PR511
turns on at dusk and/or
when it detects
movement, and sends
X-10 signals to control
other modules, or
trigger ActiveHome
macros.
Replace your existing wall switches
with the Wall Switch Module
WS467. Installs like a regular
dimmer. On/Off and Bright/Dim
functions. Other models available
for 3-way and fluorescent lighting.
Replace existing AC wall outlets
with the Receptacle Module
SR227. Has one 15A/1800W
controlled outlet and one outlet
which is always on.
S
YSTEM
The Thermostat
Setback Controller
TH2807 mounts below
your thermostat to
reduce the room
temperature at night or at
the times you set to save
energy. No wiring needed
to your existing thermostat.
29