Table of Contents
Advertisement
www.ti.com
3.5.1.1
Load Settings
If this option is clicked, it loads the configuration file which was saved earlier to bring the device to a
known state.
NOTE: Load Config will overwrite the existing data in registers with the value specified in the .json
file loaded.
3.5.1.2
Save Settings
If this option is clicked, the current register configuration will be saved into a file which can be later loaded
into the GUI using the Load option.
3.5.2
Edit
This is used to Undo and Redo the changes done in the GUI.
3.5.3
Options
The Options menu is to configure the Serial Port and connect to the serial port.
SLLU210C – October 2014 – Revised September 2019
Submit Documentation Feedback
Figure 14. File Menu
Figure 15. Edit Menu
Copyright © 2014–2019, Texas Instruments Incorporated
DRV8848EVM Hardware and GUI User Guide
DRV8848 EVM GUI
13
Advertisement
Table of Contents
