X10 DC10A Addendum

Addendum
If the CD doesn't start up automatically and display the Setup screen when you
insert it in the drive:
1. If you have a shortcut for your CD drive: Double-click on it, or right-click on it
and select either Open or Explore.
2. If you don't have a shortcut for your CD drive: Find your CD drive in Windows
Explorer and open it.
3. Double-click on Setup.
During installation, the driver for the camera should have been copied to your hard
drive, then when you plug the camera into your USB port, Windows should tell you
that it found new hardware and install the driver. If it doesn't do this, it means the
driver wasn't copied to your hard drive. Cancel out of the installation. Unplug the
camera from your USB port, and copy the driver to your hard drive as follows:
1. If you have a shortcut for your CD drive: Double-click on it, or right-click on it
and select either Open or Explore.
2. If you don't have a shortcut for your CD drive: Find your CD drive in Windows
Explorer and open it.
3. Double-click on the PROGRAMS folder.
4. Double-click on the DRIVERS folder.
5. Double-click on the file called DC1102XV.
Then plug the camera into your USB port. Windows will tell you that it found new
hardware and install the driver.
DC10A-11/01