Table of Contents
Advertisement
FUNCTION AND OPERATION
Manual Tune
The television can be tuned-in manually using Manual tuning. For example: if the television
cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station
on another System.
Use left and right to move across the screen and select any of these Manual Tune options.
Programme
System
Colour system
Programme skip
Channel
Search
Manual fine tuning : Only used if interference/weak signal is experienced.
Station
To allocate a programme position on the television for a decoder and media recorder: turn the
decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually
tune.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.658\32W...
: The number to be pressed on the remote control.
: Specific to certain areas.
: Factory set to Auto, should only be changed if problems are
experienced, i.e. NTSC input from external source.
means nothing has been stored or the facility to skip
:
the channel is ON.
: The channel number on which a station is being broadcast.
: Search up and down for a signal.
: Station identification. Use up or down and left or right to
enter up to seven characters.
Стр. 1 из 5
02.05.2015
Advertisement
Table of Contents
