Table of Contents
Advertisement
Whether you are in Program mode or not:
B (]
(-)(:] to move to line 00.
(9
(-] line-number to move to a specified line.
B (] (a] or () (¥v] to move one line at a time.
® Hold (\] and press [a] or (¥] to move up or down.
When in Program mode:
® Hold [\) (4] or (3] (Y] to move up or down rapidly.
When not in Program mode:
N (]
label to move to a specified label.
Running Programs
There are two ways to run a program:
B Use (XEQ].
B Use
and
(Run/Stop).
The PRGM annunciator blinks on and off, and the message running
appears in the display while the program is running.
Starting Programs With XEQ
To execute a program using [XEQ]:
B Enter data required by the program, if necessary.
B Press
label.
B If you hold down /abel after pressing [XEQ], the line where execu-
tion will begin is displayed. The program starts to run when /abelis
released.
6: Programming
69
Advertisement
Table of Contents
