Steering Wheel - BMW M2 CS RACING 2020 Driver Manual

2. OPERATION.
2.1.

STEERING WHEEL.

PSL: Pressing PSL activates the Pit Speed limiter. The Limiter can be operated in any driving dynamics mode. The limiter target speed can be selected via the SEPP mode. There are two different PSL limits that can be
set in the SEPP mode via the DSC switch (Limit 1 - low) / FDS switch (Limit 2 - high). Push the selected switch up or down to increase/decrease the PSL limit. In the Dash, the respective limit is displayed in SEPP mode
under OIL (Limit 1) and WAT (Limit 2). Only the limiter is active, which is in the catch-speed limit, when the PSL button is pressed. For example: If limiter 1 is set to 60 km/h and Limiter 2 is set to 120 km/h, Limiter 1 is
active at a speed up to 90 km/h. Limiter 2 is active from 90 km/h.
[Catch-Speed Limit Switch Point = ((PSL 2 - PSL 1) /2) + Limit 1] Limit 1 active < Catch-Speed Limit Switch Point < Limit 2 active.
The Pit Speed Limiter only limits the engine torque and does not make any active brake interventions. At settling initial control or approaching the selected limit with large wheel slip on
NOTICE
the rear axle or on a part of the track with a steep incline may cause a brief exceed of the selected limit.
BMW M2 CS RACING 2020 I DRIVER MANUAL I BMW M MOTORSPORT I V02 I AUGUST 2023
RADIO: Transmission.
▪
Push to Talk.
LEFT: Indicator left.
▪
Press:
WIPER: Wash / Wipe function.
▪
(Button)
Press:
WIPER: Wiper function.
(Rotary switch) ▪
Pos. 1:
▪
Pos. 2:
▪
Pos. 3:
DASH: Display.
▪
Press:
DIM: Illuminated Switch Panel (Dimming).
▪
Pos. 1 – 5:
▪
Pos. 6:
HIGH: Head Light.
▪
Short Press:
▪
Long Press:
RIGHT: Indicator right.
▪
Press:
DRINK: Triggers the drink bottle pump.
PSL: Pit Lane Speed Limiter.
▪
see below.
On/Off.
Windscreen washing + wiping.
Interval wiping.
Normal wiping.
Quick wiping.
Dash page change.
1-Bright, 5-Dark.
Illumination OFF.
High beam flashing.
High beam On/Off.
On/Off.
Page 20