Sony DVP-S3000 Manual page 8

"_" If you havea digitalcomponent s uch asanamplifier
with a digital input connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial cable
(not supplied).
When you play a DVD, set "DVD DIGITAL OUT" in
"INITIAL SETUP" to "PCM" in the menu. (page 45)
When you play a VIDEO CD, set "VIDEO CD DIGITAL
OUT" in "INITIAL SETUP" to "ON" in the menu, (page
45)
When using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical cable.
Amplifier with a
digital connector, MD
CD/DVD player deck, DAT deck, etc.
DIGITAL OUT ] I DIGITALIN
When usinga coaxial digital connectingcord
Coaxial digital connecting cord
€l Ili l Rift
(,not supplied)
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
DIGITAL I N
c0_0&
©
"_° If you have a digital component with a built-in I)01by
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial cable
(not supplied). When the component with a built-in
Dolby Digital decoder is connected, the player plays "
DVDs with sound recorded in Dolby Digital (AC-3)
format wl_ile producing th_ effect of being in a movie
theater or a concert hall.
In the menu, set "DVD DIGITAL OUT" in "INITIAL
SETUP" to "AC-3 Digital." (page 45)
Wheh using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical cable.
Component with a
built-in Dolby Digital
CD/DVD player decoder
DIGITAL OUT DIGITAL IN
OPTIC_
When usinga coaxial digital connectingcord
Coaxial digital connecting cord
II1! mill I_
(not supplied)
CD/DVD player
Component with a
built-in Dolby Digital
decoder
DIGITAL IN
©
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby Digital (AC-3) format directly using
an MD deck or DAT deck.
Note
Refer to the instructions supplied with the component to
be connected.
When you make the connections above, do not set
"DVD DIGITAL OUT" in "INITIAL SETUP" to "AC-3
Digital." if you do, a loud noise will suddenly
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
8 EN
I