Axis M5000 User Manual page 13

AXIS M5000 PTZ Camera
Configure your device
2. Make sure you have set up the application according to your needs.
Add the overlay text:
1. Go to Video > Overlays.
2. Under Overlays, select Text and click
3. Enter #D in the text field.
4. Choose text size and appearance.
5. To position the text overlay, click
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of actions, under Overlay text, select Use overlay text.
4. Select a video channel.
5. In Text, type "Motion detected".
6. Set the duration.
7. Click Save.
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
Turn on shock detection:
1. Go to System > Detectors > Shock detection.
2. Turn on shock detection, and adjust the shock sensitivity.
Create a rule:
3. Go to System > Events > Rules and add a rule.
4. Type a name for the rule.
5. In the list of conditions, under Device status, select Shock detected.
6. Click + to add a second condition.
7. In the list of conditions, under Scheduled and recurring, select Schedule.
8. In the list of schedules, select After hours .
9. In the list of actions, under Recordings, select Record video while the rule is active.
10. Select where to save the recordings.
11. Select a Camera.
12. Set the prebuffer time to 5 seconds.
.
and select an option.
13