Philips XL4902S/38 User Manual page 23

Set the sound profile
You can set the sound in the earpiece or
loudspeaker among 3 different profiles.
1
Select [Menu] > [Phone setup] > [Sounds]
> [MySound], then press [OK] to confirm.
2
Select [Earpiece]/[Loudspeaker].
3
Select a profiles, then press [OK] to
confirm.
The setting is saved.
Access the sound profile during a call Press
[Sound] for once or several times to change the
sound profile during a call.
Set the handset's ringtone volume
You can select among 5 ringtone volume levels
or [Off].
1
Select [Menu] > [Phone setup] > [Sounds]
> [Ring volume], then press [OK] to
confirm.
2
Select a volume level, then press [OK] to
confirm.
The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Ring tones], then press [OK] to confirm.
2
Select a ringtone, then press [OK] to
confirm.
The setting is saved.
22 EN
Set the visual ring
When the visual ring is activated, the display
backlight will flash when there is an incoming call.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Visual ring], then press [OK] to confirm.
2
Select [Flashing on]/[Flashing off], then
press [OK] to confirm.
The setting is saved.
Silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is turned on, your phone
does not ring or send any alerts or sound.
Note
• When you press
or when you activate the alarm, your phone
still sends alert even when the silent mode is
activated.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Silent mode], then press [OK] to
confirm.
2
Select [On/off] > [On]/[Off], then press
[OK] to confirm.
The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
The setting is saved.
is displayed.
to find your handset,