Using The Ezdispense - LG WV6-1410G Owner's Manual

global_main.book.book Page 35 Tuesday, December 6, 2022 8:07 AM
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
3
Press the Start/Pause button.
4
Press the Add Item button as necessary.
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Delay End
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button as necessary.
4
Press the Start/Pause button.
NOTE
• Except for LED of the Delay End button, all LEDs
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.

Using the ezDispense

Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
a
Dispenser 1 button
b
Dispenser 2 button
c
Buttons indicator
d
Liquid detergent indicator
e
Link indicator (Using only liquid detergent both
compartments)
f
Buttons indicator
g
Liquid fabric softener indicator
NOTE
• Whether the detergent or softener indicator may
blink and the chime may sound, even if there is
sufficient detergent or softener left to use for
approximately 2 to 4 washing programmes;
- If the liquid detergent indicator
c
buttons indicator ,
sounds, pour the detergent into the
compartment, up to the MAX line.
OPERATION
35
d
and
f
blink and the chime