2 SETUP
12
(XCF‑W, All 500 US models)
–
Install the headlight mask with the headlight. (
–
Install the 12-V battery. (
(All EU models)
–
Remove connector
signal wiring harness.
V01884-10
–
Insert the black and violet cables of the bulb included in
the separate enclosure into the socket and position it in
the turn signal indicator lamp.
S03673-01
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
Info
Pay attention to where the brake line is routed when
doing so.
V01862-10
–
Join plug-in connector
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
–
Connect plug-in connector
–
Secure turn signal relay
the connector.
–
Install the headlight mask with the headlight. (
–
Remove the air filter box cover. (
–
Remove the rear left side cover. (
p. 28)
5
from the bracket and join with turn
6
of the left turn signal using the
7
of the right turn signal using
8
of the headlight.
9
of the turn signal switch.
bk
with a cable tie and plug in
p. 31)
p. 32)
p. 20)
p. 20)