Bmc Network Configuration - Gigabyte R143-E30-AAB1 User Manual

2-6-3 BMC Network Configuration

Parameter
BMC network configuration
Lan Channel 1
Configuration Address source
Station IP address
Subnet mask
Router IP address
Station MAC address
VLAN Support
Real-time synchronize BMC
network parameter values
Description
Selects to configure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecified, Static, DynamicBmcDhcp. Default setting
is DynamicBmcDhcp.
Displays IP Address information.
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Displays the Router IP Address information.
Displays the MAC Address information.
Set BMC to enable/disable VLAN support.
Options available: Enabled, Disabled. Default setting is Disabled.
Press [Enter] will set Address source(Static/DHCP) to BMC and then get
Station IP address, Subnet mask and Router IP address from BMC.
BIOS Setup
- 148 -