Acer G205H Service Manual page 8

Acer
Cool
Warm
User
3.4 Brightness uniformity
The test standard conditions refer to Sec 3.4.
Note (4): 25% is for Samsung panel LTM200KT01 (first source).The second source spec follow Sec 5.1.
3.5 Audio Signal(option)
Input impedance
Frequency response range
Signal to noise ratio
Output power
Loading impedance
4. Input / Output Signal Specifications
4.1 Video signals
Analog
RGB signal:
Sync:
Digital :
4.2 Signal Timing
Through D-SUB/DVI/HDMI connectors, this unit can support F
160MHz input signal and WXGA+ output. Modes details as below:
Mode
9300K 0.283 ± 0.030
6500K 0.313 ± 0.030
Panel While x
Items
≧ 10K ohm
200Hz –20kHz
≧ 40 dB
≦1.0W + 1.0 W(±20% tolerance), THD 10%.
8 ohm
0.7Vp-p (Input impedance =
TTL level (Input impedance ≧ 1k Ohm)
Positive and negative sync of Separate Horizontal/Vertical Sync
TMDS Signal:
Chromaticity Coordinate
x
0.297 ± 0.030
0.329 ± 0.030
Panel While y
Specification
75 Ohm)
(min) ±200mVpp@24Bit
= 31~84 KHz, Fv=56~75Hz, with maximum pixel clock
H
Acer –LCD-G205H
y
(4)