Acer H233H Product Service Manual page 31

4.2.2 Disassembly SOP
Preparation before disassemble
1.Clean the room for disassemble
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material
flow; according to the actual condition plan the disassemble layout
4.Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) glove
6) cleaning cloth
7) ESD protection
ite
picture
m
2
1
3
2
3
1
Disassemble the stand
4 4 screws
disassembly the bezel
from the monitor, notice
the disassembly order :
1.Left (1) parts of bezel
2.Top (2) parts of bezel
3.Bottom (3) parts of
bezel
4. Right (4) parts of bezel
Don't draw the BZL
Turn over the
monitor ,dismantle the
Rear cover from the
monitor
- 31 -
Operation
Screw-driver
Tool Notes
Kick the board first.
When disassembly
the bezel ,notice don't
bend the C/B .man
must wear glove
The purpose is loose
the BZL