Table of Contents
Advertisement
8 5/∞/2/3/ENTER buttons
Use to operate the on-screen menu on your TV screen and
enter commands when setting up surround sound, speakers
levels & settings, and other setup features. Specific use of
these buttons is described in conjunction with the operations
they perform. For more information see each section.
9 SYSTEM SETUP button
Use to set up the speaker and sound systems.
0 REMOTE SETUP button.
Use to customize the remote control functions and the
remote control itself.
Press the SIGNAL SELECT and REMOTE SETUP buttons
simultaneously to switch from the SIGNAL SELECT
operation to EXTERNAL DECODER operation. Then press
the button to get the EXTERNAL DECODER function. To
get back to the SIGNAL SELECT control, press the
REMOTE SETUP button and the SIGNAL SELECT button
simultaneously once again.
- MIDNIGHT button
Switches the MIDNIGHT listening mode on or off.
= MULTI OPERATION button
Use this button to start the MULTI OPERATION mode.
~ SYSTEM OFF button
This button turns off components in two ways. First, when
pressed, it will turn off all PIONEER components. Secondly,
any component that has programmed into the SYSTEM
OFF settings will also be turned off.
For example : If you programmed power-on for your TV
and VCR, pressing the SYSTEM OFF button will turn off
these components even if they are not PIONEER products.
! RECEIVER
button
Press to turn power of the receiver on or to STANDBY (off).
@ Number buttons
These buttons can perform a variety of different functions
depending on the remote operation mode. They are most
useful for CD player and tuner operations.
# DISC/DISPLAY button
Press to switch the RDS data while listening to an FM
station.
Each press changes the display mode in the order of RT,
PS, PTY, and frequency.
This button can perform a variety of different functions
depending on the remote operation mode.
$ VOLUME button
Use to raise or lower the volume of the receiver.
VSX-908RDS, VSX-908RDS-G
% MUTE button
Press to mute or restore the volume.
^ FUNCTION button
Press to select a source. The button will cycle through all
the possible sources.
& SIGNAL SELECT button
Press SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : To select an analog signal.
DIGITAL : To select a digital signal (DVD/LD,
TV/SAT, CD, MD/TAPE 1, VCR 1, VCR 2).
AC-3 RF: To select an AC-3 RF signal (DVD/LD, TV/SAT,
VCR 1, VCR 2).
AUTO: This is the default. If there are both analog and
digital input signals, the receiver automatically selects the
best possible signal. Press the SIGNAL SELECT and
REMOTE SETUP buttons simultaneously to switch from the
SIGNAL SELECT operation to EXTERNAL DECODER
operation. Then press the button to get the EXTERNAL
DECODER function. To get back to the SIGNAL SELECT
control, press the REMOTE SETUP button and the SIGNAL
SELECT button simultaneously once again.
2
*
/dts buttons
Press these buttons to put the receiver in the selected
sound mode.
( STEREO/DIGITAL NR button
STEREO : Press this button to put the receiver into the
stereo mode when it's in a different sound mode. For more
information on the sound modes.
DIGITAL NR : Switches the DIGITAL NR on or off .
) DSP button
Press repeatedly to select a DSP sound mode.
97
Advertisement
Table of Contents
