Samsung QBC User Manual page 101

2nd 3rd
Auto Source Switching Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
Default Input
Power Control Auto Power On
Max. Power Saving
Standby Control
Remote Configuration
Power Button
Description
Switch to preset source or another source when the main source device gets disconnected.
Select whether to restore the selected primary input source when a primary input source is activated.
" The Primary Source Recovery function is disabled if
Select a primary source to switch to when no signals are received from the current input.
Select a secondary source to switch to when no signals are received from the current input.
" The Secondary Source function is disabled if
Select the default input to switch to when the new input is disconnected. The
connected through cables.
" Auto Source Switching must be set to
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Conserve power by turning off PC monitor when PC is not used for certain time.
When no signal is detected, it determines whether or not to enter sleep mode.
Keep the network connection active when the product is turned off.
The power button on the remote control
Primary Source is set to All.
Primary Source is set to All.
Last Input
New Input to enable the Default Input
can be set to turn on the power or turn on or off the power.
option only includes external inputs
option.
101