Table of Contents
Advertisement
Power requirement
Product specifications may be changed without prior notice due to upgrade of product functions.
Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
• For information of the power supply and power consumption, refer to the label attached to the product.
- The typical power consumption is measured in accordance with IEC 62087 or each country's energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending upon the model or country, the typical power consumption may not be on label.
(Depending upon country)
Television system
Channel coverage
(Band)
External antenna impedance
Operating Temperature
Operating Humidity
* This specification range applies to TV wall mounts when adjusting for proper viewing angle.
Specifications
Broadcasting Specifications
0 °C to 40 °C
(32 °F to 104 °F)
Less than 80 %
Conditions for Wall Mount Installation
Tilt Angle
ATSC, ATSC3.0 (Only USA), NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
Environment Condition
Storage Temperature
Storage Humidity
AC 120 V~ 50/60 Hz
75 Ω
-20 °C to 60 °C
(-4 °F to 140 °F)
Less than 85 %
0° - 15°
21
Advertisement
Table of Contents
