Updating Software; Restoring The Television To The Default Settings - Grundig 26 VLC 9201 BG Manual

ConvenienCe­FunCtions
Changing­the­pin­code
You can also enter a personal PIN code instead
of the default code »1234«. Please take note of
your own PIN code.
1 Select »Set PIN« with »
»oK« to confirm.
2 Enter the current PIN code 1 2 3 4 with
»1...0«.
3 Enter your new four digit PIN code with
»1...0«.
4 Enter your new four digit PIN code with
»1...0« again.
menu
5 Press » « to end the setting.
locking­television­channels­
You can lock individual television channels, for
example channels unsuitable for children, using
a personal PIN code.
1 Open the menu with »
2 Select the »SOURCE SETUP« menu with »
or » « and press »oK« to confirm.
Λ
3 Select the line »Program Table« with »
» « and press »oK« to confirm.
Λ
– T he »PROGRAM TABLE« menu is dis-
played.
4 In the »PROGRAM TABLE« menu, switch
over to the list view with »
5 Select the channel to be locked with »
or » «.
Λ
6 Select the column »Lock« with »
and press »oK« to lock the channel.
7 Enter the PIN code »1234« with »1­...­0«.
– The channel is marked using »✔«.
note:
To remove the lock, select the channel again
7
with » « or »
v Λ
and then enter the PIN code 1 2 3 4 using
»1­...­0«.
menu
8 Press » « to end the setting.
­ 3 8
ENGLISH
« or » « and press
v Λ
menu
«.
v
« (yellow).

<
« or »
«, press »oK« to confirm
­------------------------------------------------------------------------
updating­software
(for digital channels only)
1 In the »SETTINGS« menu, select the line
»Check For Updates updates« with »
» « and press »oK« to confirm.
Λ
– A search for new software will be made
and – if available – it will be installed.
note:
If a search for software updates should be
7
made automatically, select the line »Auto-
matic OAD« with »
>
or » « to select the option »On«.
– T he software will be updated automati-
cally as far as possible.
menu
2 Press »
restoring­the­television­to­the­
default­settings
This function allows you to delete the channel
lists and all custom settings.
«
v
1 In the »SETTINGS« menu, select the line
» Restore Factory Defaults« with »
« or
and press »oK« to confirm.
2 Press »

message.
– T he »Source Setup« menu appears.
3 Continue the settings with the chapter " Initial
set-up and tuning television channels" on
«
page 14.
v
>
«
« or » « and use »
v Λ
« to end the setting.
« (green) to confirm the warning
« or
v
<
«
« or » «
v Λ