Table of Contents
Advertisement
Basic settings
basic
position
Remote start
Factory setting
Factory setting (may vary depending on device type)
1
15.2 Change basic settings
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
press.
1.
To open the basic settings,
2.
press.
aThe display shows H:xx.
The display shows .
42
Display text
rc:01
re:
3 seconds
a
Selection
rc:00 - rc:02
Start with
Y:ES
Confirm with
3.
display shows the desired setting.
or press repeatedly until the
4.
display shows the appropriate value.
You can change several settings.
To save the settings,
5.
Description
→ "Remote Start", page
44 activate or deactivate.
The following settings are
possible:
¡With the setting "rc:00"
the function is permanently
deactivated.
¡With the setting "rc:01"
The function can be
selected using the button.
→ "Activate Remote Start",
page 44
¡With the setting "rc:02"
the function is permanently
activated.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→ "Home Connect",
page 43
Reset changed settings to
factory defaults. The settings
must be made for initial
commissioning.
Press repeatedly until the
Press for 3 seconds.
Advertisement
Table of Contents
