Electrolux 7 Series Service Manual page 19

• Button no. 6: OPTION
It is related to the part of the LCD display (see figure) showing: the
graphic bar and the "Time save" option.
Press the button and half or all of the graduated scale may light up,
depending on the configuration of the button. The related symbol
also lights simultaneously.
− Press the button once and the chosen option is "Daily".
− Press the button twice and the chosen option is "Super Quick".
• Button no. 7: DELAYED START
It is related to the part of the LCD display (see figure) showing the
related symbol and the three digits.
Press the button in sequence to increase the delay by 30' up to 2
hours, whereas from 2 hours to 20 hours, the increase is of 1 (one)
hour every time the button is pressed. The symbol lights and stays
on for the entire delay phase.
During the programme selection phase, a delayed start can be
selected, from 30' to 20 hours (30'
3h... 20h 0h) and the time is shown on the LCD display;
During the last hour, the time decreases minute by minute.
To cancel the delayed start time, after the cycle has started,
pause the washing machine using the related button and cancel
the option.
• Button no. 8: START/PAUSE
This button is used to START the appliance or PAUSE it.
It is related to LED L1, which flashes when the appliance is on
pause, whereas it is lit continuously during a washing cycle.
• Button no. 9: STEAM (where featured)
Press this button in sequence to select from three different steam
intensity levels.
These are highlighted by the lighting of LEDs L2/L3/L4 and the
related symbol lighting on the LCD display.
2010 dmm
60' 90' 2h
19/96
599 73 68-54