Quality; Information Label; Product And Catalog Serial Numbers; Remove Circuit Breaker From Container - ABB AKD-5 Installation Manual

•
A factory-installed rejection feature prevents mismatching circuit breakers and
cassettes/substructure, preventing the insertion of a circuit breaker with a lower rating into a higher
rated cassette/substructure, or the insertion of a higher rated circuit breaker into a lower rated
cassette/substructure.

Quality

All EntelliGuard R circuit breakers have been designed and manufactured to ANSI standards. The design was based
on the original requirements from the Legacy Switchgear and Breaker. The product is assembled in the Burlington,
Iowa factory; and is inspected using some of the same master gauges used on the legacy AK, AKR breakers to
confirm electrical and mechanical performance.

Information Label

On the side wall of each circuit breaker there is a factory-assembled, side label that details all features included on
both the circuit breaker and on the trip unit.

Product and Catalog Serial Numbers

Product and catalog serial numbers should be kept handy when communicating about the circuit breaker. Each
circuit breaker has a unique serial number located on the left side (viewed from front) of the front fascia.

Remove Circuit Breaker from Container

Inspect

1. Inspect the shipping container for obvious signs of rough handling and/or external damage incurred during
transportation.
2. Record any observed damage for reporting to the carrier. Ensure all recorded reports and claims include the
order number and name plate information.
3. Remove the banding straps and lift off the top cover.
4. Remove all packaging material.
5. Remove all product documentation and store properly.
6. Unscrew the mounting screws that fasten the circuit breaker to the bottom of the shipping palette and remove
the circuit breaker.
11 EntelliGuard R Circuit Breaker Retrofill AKD-5/6 Installation Manual
PRODUCT DAMAGE
• Ensure circuit breaker and its accessories
are always used within their designated
ratings.
• Do not allow the circuit breaker to hit a
hard surface while handling.
•
Do not drag or slide the circuit breaker
across a hard or rough surface
DEH0005240 R01