Table of Contents
Advertisement
7. SPECIFICATIONS
[A-676]
Continuous power output (both channels driven at 20 Hz to 20 kHz)**
U,K.model
T.H.D. 0.007%, 8 2...
T.H.D. 0.009%, 4 9...
Multi-voltage model
T.H.D. 0.007 %, 82.
T.H.D. 0.009 %, 4.2
DIN Continuous power output (both channels driven at 1 kHz)
T.H.D. 1.0 %, 89.
80 W + 80W
T.HiD. 1.0 %, 49.
. 120 W + 120W
Power bandwidth
0.05 %,
82...
Damping factor
-. 70W + 70W*
+ 95W + 95 W*
80 W + 80 W*
+
5 Hz — 80 kHz*
CD, TUNER, LINE, TAPE...
PHONO overload level
1 kHz, T.H.D. 0.008 % (MM/MC) . . .
Output level/impedance
TAPE REC, ADAPTOR OUTPUT . . .
Frequency response
PHONO (MM), 20 Hz to 20 kHz
PHONO (MC), 20 Hz to 20 kHz
CD, TUNER, LINE, TAPE, 1 Hz to 150 kHz
Tone control (volume control set at ~ 40 dB position)
BASS.
+ 8 dB (100 Hz)
TREBLE
= 8 dB (10 kHe)
Loudness contour (volume contro! set at — 40 48 position}
+5 dB (100 Hz\/+3 dB (10 kHz)
ves 17 Hz (12 dB/oct.)
150 mV/50 kQ
wes. 200 mV/19 mV
«- 150 mV/2.2 kQ
0.2 dB
0.3 dB
*$dB*
ct
+
Filter (SUBSONIC).
Signal-to-Noise ratio {IHF short circuit,
A network)
PHONO (MM, 5 mV input/MC, 0.6 mV input) .
CD, TUNER, LINE, TAPE . .
Signal-to-Noise ratio (DIN, continuous power/50 mW)
CD, TUNER, LINE, TAPE.
. 92 dB/68 dB*
. 94 dB/76 dB*
«110 dB*
ye ow As)
Power Supply/Miscellaneous
Power requirements
U.K. model . .
Multi-voltage models
a.c. 240 Volts~ , 50/60 Hz
AC 110/120 — 127/220/240V
(switchable), 50/60 Hz
Power consumption ....
... 650 W
AC outlets {Multi-voltage models only)
Switched (x 2).
100 W
Unswitched (x 1) .
100 W
Dimensions
420 (W) x 435 (D) x 162 (H) mm
16-9/16 (W) x 17-1/8 (D) x 6-3/8 (H) in
12.8 kg (28 Ibs 4 oz)
Weight (without package) .
Accessories
Operating instructions
ations and design subject to possible modification
without
notice, due to improvements.
*
When the DIRECT button to ON.
** Measured by Audio Spectrum Analyzer.
33
Advertisement
Table of Contents
