GE MDS TransNEXT NET9L Technical Manual page 52

the "rssi" command for continuous sampling (until <CR> is entered); alternatively use "rssi!" for a 1-shot
sample that returns to the "SETUP>" prompt.
Note that the transmission functions of setup mode are not intended for field use. Setup mode can be
terminated at any time by typing "quit" at the "SETUP>" prompt. Duration of Setup mode is timed and
will expire after 10 minutes as a protection to keep a unit from accidentally being left in this state.
52 MDS TransNEXT Technical Manual MDS 05-7280A01, Rev. A