Grill Burner; Oven Thermostat - Zanussi GC 20 M Instructions For The Use And Care

Oven burner
Undo the securing screw and remove the
oven bottom; from inside the dish-
warming drawer unscrew the wing nut
securing the bracket carrying the spark
plug and the thermocouple as well as the
one to be found in the front part of the
burner; then push the burner itself
forwards. Unscrew the nozzle and replace
it with the corresponding new nozzle.
Refit the parts reversing the above
procedure.
Grill burner
Unscrew the two screws locking the burner
to the bracket (Fig. 14), then remove the
burner by lowering it and pulling it
forward.
Unscrew the nozzle and replace it with
the corresponding new nozzle.
Refit the burner reversing the above
procedure.
Oven thermostat
Remove the control knob and replace the
by-pass pin fitted on the top of the knob
shaft with the corresponding one suitable
for the new type of gas.
17