Sony Handycam DCR-HC20 Operation Manual page 68

The starting point of the first program is set,
and the upper part of the program mark
changes to light blue.
__VkDEOEDkT _u008550_
7 Search for the end of the first scene
that you want to record on your
camcorder, then pause playback.
You can adjust the position wi|h [_/
(frame).
Touch [MARK OIJT].
The ending point oflhe first program is set,
and |he lower part of the program mark
changes to light blue.
__VkD_ EDkT _u 009070#
TOT_ 0_00_13_0
Repeat steps 5 to 8 and create
programs.
_Set your VCR to recording pause.
Skip Ibis step if your camcorder is
connected via an i LINK cable
1 Touch [START I.
VkD_ EDtT _u _000_
ST_
_E_ 3
12Touch [EXECI.
A search for the beginning oflhe first
program star_s, then the recording starts.
[SEARCH] appears during Ihe search and
[EDITING] appears during editing.
When a program is recorded, lhe program
mark stops flashing and remains lit. When
all programs have been recorded, d_e
program editing operation stops
automatically.
To cancel recording, touch [CANCEL].
To end Digital programediting
Touch [_ END[.
To save a programwithout using it to
record
Touch [_ END] in step 9.
The program is stored in memory until lhe
cassette is ejecled.
To erase programs
1 Follow steps 1 to 4 in "Recording the
selected scenes as programs" (p. 67),
then touch [UNDOI.
2 Touch [ERASE 1MARK l to delete the
last set program. Or, touch IERASE
ALL] to delete all the programs.
3 Touch [EXEq.
The programs are deleted.
To cancel Ibis operation, touch [CANCEL].
O Notes
• YOU cannot set tile s_arling Foint or ending point on
a blank seclion of the tape. Ifthere is a blank section,
lhe total time may not appear correctly.
• When you cannot operale the device correctly using
an i.LINK came connection, select ]IR] in slep 9 on
page 64, and set the [IR SETUP] code.
68 Dubbing/Editing