Warnings And Symbols - Audi R8 2010 Owner's Manual

To delete ma x imum speed
- Turn off the ignition.
- Briefly press the button in the instrument cluster
=> page 30, fig. 25 . The odometer and the digital clock are
now illuminated.
- Press the button for at least 2 seconds. The currently
stored maximum speed appears in the display.
- Press the reset button in the wiper lever @ => page 30,
fig. 26 until the crossed out speed warning symbol for
warning threshold 2 appears in the display .
A few seconds after t he ad ju stment is completed, the illum inat ion for
the odometer and the digital clock will go out .
[I]
Tips
Th is warning threshold can also be controlled through the trip
computer => page 24, "Navigating the menu" . •
Warnings and symbols
Red symbols
A red symbol means DANGER.
- Pull of the road and st op t he vehicle.
- Turn off the engine.
- Check the malfunctioning system . Contact your autho -
rized Audi dealer or a qualified workshop for assistance.
Controls and equip-
ment
Safety first
Dr ive r information syst e m
BRAKE
-
(Ci))
BRAKE
.J_
COOLANT
~
OIL
PRESSURE
USA models :
Malfunction in the brake system
=> page 33
-
-
Canada models : => page 33
Malfunction in the brake system
Engine coolant leve l too low/
engine coo lant t empe ratu re too
high -
-
=> page 33
Engine oil pressure too low => page 34
Whe n a red symbol appears, a wa rning tone will sound three t imes in
succession. The symbol continues to flash until the ma lfunction has
been repaired.
If
t here is more than one malfunction, the symbo ls
appear one after the other for about two seconds.
[ i ]
Tips
• The message for a malfunct ion can be shown by pressing on the
left knob .
• During route guidance on vehicles with a nav igat ion system, the
wa rning symbo l is shown in the fie ld above. •
Yellow symbols
Ayellow symbol means WARNING.
Low fue l level
=>page 34
Check engine oil level =>page 35
Engine o il sensor malfunction => page 35
Vehicle care Do-it-yourself: service Technical data