Table of Contents
Advertisement
Optional Equipment Connection and Operation
These terminals can also be used to
connect to a VCR or another TV/Monitor.
U
pe tera
Connect them to the input of the desired
device. See figure for details replacing
the Audio Amp with either a VCR or
TV/Monitor. Don't forget to connect
the video (PROG. OUT) as needed
(not shown in figure).
To Auxiliary Input
OUT
(PCM/AC-3)
To Audio Amp Connection (Stereo)
e To Audio Amp
Connect to an external audio amplifier auxiliary
input for monitoring sound through a stereo
,GMetem
: Note: "TO. AUDIO AMP" terminals cannot be used to connect directly to |
external 'Speakers.
Adjustment — When an audio amp is "Conmecisd to "TO 'AUDIO | AMP"
terminals:
1.
Select SPEAKER
"ON" Mode.
(Refer to the Audio Menu Speaker
section.)
Set volume of audio amp to near minimum.
Adjust volume of TV to desired listening level.
Adjust volume of audio amp to match the volume of the TV.
Select SPEAKER "OFF&VAO" (Variable Audio Output) Mode. (Refer to
the Audio Menu Speaker section.)
Audio bass, treble, balance, volume, and mute can now be controlled by
the TV Remote Control. When "OFF&FAO" (Fix Audio Output) mode is
selected
in the Audio
Menu,
the external amplifier speakers
are
controlled by the Audio Amplifier.
NPON
D
m. n
Advertisement
Table of Contents
