LG MR11 Owner's Manual page 39

DISPLAY menu
You can set the status display mode.
a Press the SETTINGS button on the remote control. "TEST TONE" appears on the status display.
b Press the PRESET
REPEAT SETTINGS
PRESET+ PRESET+
OK
PRESET-
PRESET-
EQ USB REC.
c Press the OK button on the remote control. Then press the PRESET
- AUTO: Displays for 15 seconds then dims.
- OFF: Displays for 15 seconds then turns off after dims for 5 seconds.
- ON: Display continues with light up.
REPEAT SETTINGS STOP
PRESET+
OK OK
PRESET-
EQ USB REC. INFO
d Press SETTINGS to exit the setup menu.
REPEAT SETTINGS SETTINGS STOP
button on the remote control until "DISPLAY" appears on the status display.
LEVEL
STOP
SETTINGS
INFO
REPEAT SETTINGS STOP
PRESET+ PRESET+
SETTINGS
OK
PRESET- PRESET-
EQ USB REC. INFO
TEST TONE
AV SYNC
RESET
AUTO OFF
SETTINGS
DISPLAY
DOLBY DRC
to select DISPLAY mode.
ON
39