Magnetometer
In the event of Magnetometer failure:
•
Inspect physical placement U6140 and their related components on main PCB board (see gyroscope schematic
page on next slide)
•
Connect the board to a display and power the board/display with battery or factory cable.
•
Launch CQA app, test each magnetometer.
•
Look for magnetometer on all axis X,Y,Z.
•
As you rotate the board orientation, magnetometer reading will register reading accordingly.
MOTOROLA CONFIDENTIAL
Moto Z Play (Droid)/Moto Z Play
BASEBAND TROUBLESHOOTING GUIDE