Table of Contents
Advertisement
Before Using the Remote Control
With this Remote Control, you can operate your TV and
most models of remote-controlled
VCR's and Cable TV
converters
even if they are different
brands.
However, this Remote Control must be programmed
to
control
other brands of VCR's and/or Converters.
If you
will be using your TV set with a TOSHIBA VCR, your
remote has already been preprogrammed
for you.
• Before attempting
to operate your Remote Control,
install the batteries
according
to the section
"Installing
and replacing
batteries"
shown below.
• For more detailed instructions,
see the section
"Pro-
gramming
the Remote Control"
on page 11.
Place the Remote Control with the face down. Press
down on the ridged area of the battery cover and
slide it off.
Press and slide to remove.
2
Place two "AAA"
size batteries,
matching
the + and -
signs on each battery to the + and - signs of the
battery compartment.
3
Replace the battery cover until the lock snaps.
Notes:
• After installing
new batteries, the Remote Control will
set itself to the codes for TOSHIBA's TV and VCR. If
you are using the Remote Control to operate equip-
ment that uses different
codes, it will have to be
reprogrammed
for those codes.
• This Remote Control
may have functions
not available
on the original
remote control.
• These functions
may or may not operate your VCR or
Cable TV Converter.
Refer to the owner's
manuals
supplied with the equipment
to see which functions
are available.
• The remote control
supplied with your VCR or Cable
TV Converter
may have keys not duplicated
on this
Remote Control.
If these functions
are desired, the
original
remote will have to be used.
CAUTION:
• Do not throw your batteries into a fire. Dispose of your
batteries
in a designated
disposal
area.
• Do not combine
used old batteries with new ones.
• Do not mix battery types.
Tips for Best Operation
• For optimum
performance,
aim the Remote Control
directly
at the TV from a distance of no more than 16 ft
(5m) and be sure there is no obstruction
between the
Remote Control and the TV.
• If your Remote Control does not always adjust the TV
as you wish, you probably
need to replace the batter-
ies.
• Remove dead batteries immediately
to prevent battery
acid from leaking into the battery compartment.
• If you do not intend to use the Remote Control for a
long period, remove the batteries.
n
2
o
E
C
o
u
E
P
0
€
o
o
9
Advertisement
Table of Contents
