Table of Contents
Advertisement
en Basic settings
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dis-
pensing
Intensive drying
InfoLight
1
Factory setting (may vary according to model)
34
Display text Selection
1
H04
H00 - H07
1
r04
r00 - r06
1
d00
d00 - d01
1
I01
I00 - I01
Description
Set the water softening sys-
tem to your water hardness.
→ "Setting the water soften-
ing system", Page 24
Level H00 switches the wa-
ter softening system off.
Set the amount of rinse aid
to be dispensed.
Switch the rinse aid system
off with level r00.
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note: Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d01" or
off "d00".
Switch InfoLight on or off.
While the programme is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This light
will not be visible if the appli-
ance is installed at eye level
with the cabinet front fitted
flush. If the appliance door is
not completely closed, the
spot of light will flash. The
programme has ended when
the spot of light is no longer
visible on the floor.
Level "I00" switches In-
foLightoff.
Advertisement
Table of Contents
