Network Settings; Remote Start; Commendation - Siemens WQ45B2B9IL User Manual And Installation Instructions

en Home Connect
14.5 Deactivating Wi-Fi on the
appliance
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 37
The display shows "on".
¡
Press to change the setting.
▶
The display shows "oFF" if the Wi-
a
Fi is deactivated.
14.6 Resetting the appliance

network settings

Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 37
The display shows "rES" .
¡
Press and hold
▶
3 seconds.
The network settings are reset.
a
14.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
The appliance door is opened.
¡
is pressed.
¡
¡

Remote Start

Following a power cut.
¡
38
for at least
is pressed.
Activating remote start
Requirements
The appliance is connected to your
¡
home WiFi network.
The appliance is connected to the
¡
Home Connect app.
A programme is selected.
¡
The appliance door is closed.
¡
Press Remote Start
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press Remote Start
▶
goes out.
a
14.8 Intelligent programme
recommendation
After you have washed your laundry
in the washing machine, the dryer will
recommend a suitable programme
for drying your laundry.
To determine the best drying
programme to use, your appliances
must transmit and receive
information. Observe the following:
The washing machine must be an
¡
appliance with the Home Connect
function.
The washing machine and dryer
¡
must be connected to your home
network and registered in your
Home Connect app.
Using the intelligent programme
recommendation
Press intelligentDry .
1.
The appliance detects a suitable
a
programme. To cancel or change
the programme recommendation,
set a different programme or
switch the appliance to standby
mode.
.
.