Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Required
Phillips screwdriver
" (14 mm) open-end
wrench (for leveling leg
locknuts)
Parts Supplied
Console
Screws (2)
A. Console
B. Bracket
2
INSTALLATION REQUIREMENTS
Level
Measuring tape
Brackets (2)
A
B
Location Requirements
Your laundry tower can be installed freestanding or between your
washer and dryer. Proper installation is your responsibility.
Installation Clearances
The location must be large enough to allow the drawers to be
fully opened.
When you are installing your laundry tower between or next to
your washer and dryer, a spacing of 1" (2.5 cm) on the sides of
the laundry tower is recommended to reduce noise transfer.
Additional spacing should be considered for ease of
installation and servicing.
Laundry Tower Dimensions
36"*
(91.4 cm)
38
"*
(98.1 cm)
25
"**
(63.8 cm)
42
"
(108.8 cm)
*Includes leveling feet
**Includes drawer front
13
"
(34.3 cm)