Whirlpool WTW4950X Use And Care Manual page 5

RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. Always select "Yes" for Fabric
softener to be added when using the Fabric Softener option.
Some cycles will use a spray rinse.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for proper load sensing and
spinning, the lid will lock and the Lid
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press
START/Pause/Unlock again to resume
the cycle. Avoid opening the lid during sensing. The sensing
process will start over when the washer is restarted.
5