Table of Contents
Advertisement
Points To Notice When Connecting To
The Network
When connecting the machine to the network, connect to
the sub network (range divided by the router) in which only
the authorized device (such as PC) for the communication
with the machine in the protected LAN in some way like
firewall is connected. And manage the connected devices in
the sub network so that the network condition may always
be maintained. Also use the filter setting function to prevent
illegal access.
About Password Management
A unique administrator password is required before using
the machine for the first time.
Note
For security reasons, it is not recommended that the
machine is connected to a network before changing the
administrator password.
Changing administrator password
1.
Click [Log In].
2.
Enter the administrator password, and click [OK].
The default password is "aaaaa".
3.
Click [System Settings].
4.
Click [Change Password] and enter information
needed for changing the password.
Note
Your new password must be consisted of 4 to 32 one byte
characters.
It is strongly recommended to assign a strong administrator
password and the password should be managed by
authorized personnel.
Please securely store the assigned password.
About password management
It is requested to change the administrator password
right after installing the machine. The password should be
changed by the administrator and strictly managed. Write
down the changed password in the following table and keep
it carefully.
Please write "New Password".
Factory default
Administrator
aaaaa
password
Note
Please take care not to forget newly set administrator
password. If it is forgotten there is no way to confirm it and
some settings and functions that require administrator
authorization may not be used.
New Password
Trademark Acknowledgements
The following trademarks and registered trademarks are
used in conjunction with the machine and its peripheral
devices and accessories.
Microsoft® and Windows® are registered trademarks of
US Microsoft Corporation in the U.S. and other countries.
Other company names or product names are registered
trademarks or trademarks of each company.
M i c ro s o f t p ro d u c t s c re e n s h o t s re p r i n t e d w i t h
permission from Microsoft Corporation.
Please note
For information on your operating system, please refer
to your operating system manual or the online Help
function.
The explanations of screens and procedures are primarily
for Windows®. The screens may vary depending on
the version of the operating system or the software
application.
Wherever "BP-xxxxx" appears in this manual, please
substitute your model name for "xxxxx".
Considerable care has been taken in preparing this
manual. If you have any comments or concerns about
the manual, please contact your dealer or nearest
SHARP Service Department.
This product has undergone strict quality control and
inspection procedures. In the unlikely event that a defect
or other problem is discovered, please contact your
dealer or nearest SHARP Service Department.
Aside from instances provided for by law, SHARP is
not responsible for failures occurring during the use of
the product or its options, or failures due to incorrect
operation of the product and its options, or other
failures, or for any damage that occurs due to use of the
product.
Software License
The Software License will appear when you download the
*1
software
or install the software from the CD-ROM
By downloading and using the software, you are agreeing to
the bound by the terms of the Software License.
*1: If the software is obtained from our website.
*2: If the "Software CD-ROM" is provided with the machine.
*2
.
7
Advertisement
Table of Contents
